Use case

Send the FM multiplex to transmitters over IP

Replace the STL radio link with composite MPX over your IP network.

The problem

Why it happens

FM stations still feed many transmitters over dedicated STL radio links or analogue lines. They are costly to license and maintain, and the multiplex often has to be rebuilt at every site, so processing and RDS are not exactly what the studio set.

Sounds familiar?

  • Licensed STL links that are expensive to keep
  • Stereo coding and RDS duplicated at each transmitter
  • No view of the multiplex once it leaves the studio

The KVARTA way

How we solve it

Build the multiplex once at the studio with your own chain or the Broadcast MPX Source. The MPX Over IP Encoder sends it over IP as NanoMPX or MicroMPX, several streams at a time, and the MPX Over IP Decoder restores composite MPX at the transmitter. Both ends show spectrum, deviation, MPX power, loudness and RDS, and the decoder reports pilot, buffer, clock drift and packet loss for every stream.

What is checked

  • Stream on air, pilot and buffer
  • Packet loss and clock drift
  • Peak deviation and ITU-R BS.412 MPX power
  • Loudness and decoded RDS at both ends

Devices

Recommended for this use case

FAQ

Common questions

Can I keep my existing audio processor and stereo coder?

Yes. Feed their composite MPX or AES3 output into the MPX Over IP Encoder. The multiplex is carried as it is.

How much bandwidth does a stream need?

It depends on the codec and settings. The demo units send NanoMPX and MicroMPX at 320 kbps each.

Can one encoder feed several transmitter sites?

Yes. Add several Tx streams, or use multicast, so each site's decoder receives the same multiplex.

Used by: Radio broadcasters

See it on a live device

Open the demo lab, or tell us about your network and we will propose a setup.